Plate Cover for Trucks: Fit, Rules and What to Buy

The right plate cover for a truck is one that fits a standard 12" x 6" plate, clears your bumper, sensors and tow hooks, and suits where you drive it. For trail days, private land, shows and motorsport events, a blackout cover that covers the plate on demand and uncovers it in seconds is the most practical choice. Our Ghost Curtain Cover is $129.99 and fits standard U.S. and Canadian plates without tools. On public roads, your plate must stay readable, and the rules differ by state. This guide covers both.
TL;DR
- Every U.S. truck plate is 12" x 6", so a cover made for standard plates fits the plate itself. The harder part is the mounting spot on your bumper.
- Fitment on trucks depends on year, trim, bumper, sensors, tow hooks and cameras, so check your exact configuration before you buy.
- States including California, New York, Maryland and Massachusetts restrict covers that reduce legibility or interfere with cameras and toll readers. Keep your plate fully visible and legible whenever you drive on public roads.
- A blackout cover is built for off-road, private-property, show and motorsport use. A weather-sealed, tool-free design makes it easy to install and take off.
Table of Contents
- What counts as a plate cover on a truck
- Fit: the plate is standard, the truck is not
- Installing a truck plate cover
- Rules: where the plate must stay readable
- Where a blackout cover fits a truck owner’s life
- Mechanical or electric: choosing for your truck
- Promo: the Ghost Curtain Cover for your truck
- Our view as a plate-cover specialist
- FAQ
- Sources
What counts as a plate cover on a truck
A plate cover is anything that sits over the registration plate: a clear shield, a tinted shield, a flip-style cover, a weather cover, or a blackout cover that hides the plate on demand. A plate frame is different. It surrounds the plate’s edge and should not touch the characters or the state name.
For trucks the choice usually comes down to what you do with the vehicle:
- Daily driver and work truck: You want protection from road salt, mud and rust on the plate, with nothing that blocks the numbers, the state name or the tabs.
- Trail, ranch and off-road rigs: Dust, mud, brush and water hit the plate constantly. A weather-sealed cover keeps the plate clean and protected.
- Show trucks and motorsport: Many owners want a clean look at an event, in the paddock or on a trailer, with the plate hidden while the truck is on display or on private ground.
We built our covers for that last group of drivers and for anyone who wants control over when the plate is visible. We sell mechanical covers (a manual sliding curtain) and electric covers (electric glass with a wireless remote), for cars, trucks and motorcycles.
Fit: the plate is standard, the truck is not
The plate is the easy part. In 1956 the Automobile Manufacturers Association standardized U.S. and Canadian plates at 12 inches by 6 inches, and that size covers cars, buses, trucks and trailers. Most universal frames measure about 12-1/4" x 6-3/8" so the plate sits inside with room to spare. That is why a cover designed for standard plates fits across brands, and why our covers are made to fit all standard U.S. and Canadian plates.
What varies is everything around the plate. According to a truck accessory maker’s fitment guidance, fit depends on year, make, model, trim, cab size, bed size and factory bumper. Off-road, luxury, sport and technology packages can add skid plates, parking sensors, radar modules, tow hooks or cameras. Automakers also change frame mounts, bumper shapes and tow-hook locations during redesigns and mid-cycle refreshes, so a part that fit last year’s truck may not fit this year’s.
A five-minute fit check
Before you order any cover, walk around the truck with a tape measure:
- Measure the mounting area. You need at least 12" wide by 6" tall of flat space, plus a little margin for a frame or cover body.
- Look behind the plate. Note the tow hook, hitch, receiver, step bumper or sensor housings that sit close to the plate.
- Check the rear camera and sensors. Parking sensors, radar and backup cameras need a clear field of view. Do not mount anything that blocks them.
- Check the plate light. Your rear plate lamp must still illuminate the plate. A cover body that shades the lamp creates a problem at night.
- Look at the angle. Many trucks mount the plate high on the tailgate or low on a bumper. The angle matters for legibility, covered below.
If you tow, add one more check. A trailer hitch ball, wiring harness or a swinging tailgate can brush the cover. Mount it so nothing rubs and nothing rattles.
Installing a truck plate cover
A good installation is quick. Our covers are designed for tool-free, quick installation, and the weather-sealed construction is built for the dirt, water and vibration a truck sees. Here is the routine we recommend for any truck:
- Clean the plate and mounting surface. Mud and road film stop things sitting flat.
- Position the plate squarely. It should be horizontal, upright and centered in its mounting area.
- Secure the cover so it does not swing. Plates that rattle or hang loose are a legal problem in several states, and a swinging cover wears the plate.
- Confirm clearance. Open and close the tailgate, and check the cover against the bumper, hitch and tow hooks.
- Test the operation. With a mechanical curtain, slide it fully open and closed. With the electric model, check the remote from the driver’s seat.
- Check the plate light and any camera view. Do this at dusk or in a dim garage so you see what an officer would see.
Maintenance is light. Rinse mud and salt from the cover and the surrounding area, and wipe the surface with a soft cloth so grit does not scratch it. Check the mounting points after rough trail use, because washboard roads and rock crawling loosen fasteners.
Rules: where the plate must stay readable

This is the part many buyers skip, and it decides how you can use any cover. There is no single national plate cover law. Each state sets its own rules, and they are getting tighter. The common thread: when you are on a public road, the plate must be securely fastened, clearly visible, upright and legible, with nothing that reduces reading by officers or electronic readers.
Here are examples from official sources:
| State | What the rule says | Source |
|---|---|---|
| California | Plates must be securely fastened, visible, upright and legible. A narrow security cover is allowed only directly over the registration tabs. Casings, shields, frames, shades or tints that obstruct reading by law enforcement or toll devices are prohibited. The statute was amended effective January 1, 2026. | Vehicle Code 5201 |
| New York | Penalties increased for covering plates with glass, plastic or material that could distort traffic-camera or electronic toll-reader images. Fines in the DMV’s September 2024 alert range from $100 to $500. | NY DMV alert |
| Maryland | House Bill 470 (Chapter 566), effective October 1, 2025, requires plates free of foreign materials including defined plate covers, and prohibits sale or advertising of registration-plate covers. | Chapter 566 |
| Massachusetts | A glass, plastic or similar cover is prohibited when it reduces legibility or substantially diminishes reflectivity. | 540 CMR 22.02 |
| Arkansas | A cover that makes the plate harder to read or reduces reflectivity is prohibited. The plate must be securely fastened, horizontal, visible and legible. | Ark. Code 27-14-716 |
Two more details help. First, California’s bill text for AB 1085 sets a $250 fine per violation for operating with a prohibited device and a $1,000 fine per item sold or manufactured in violation. Second, an Oregon appeals court held in State v. Mendell (2024) that knowingly displaying a plate covered so its characters are unreadable in normal driving conditions violates state law, even if it is unreadable only in some conditions.
Why a “legal” label does not settle it
Even a clear plastic shield can fall foul of state rules, because glare can defeat automated cameras, especially infrared readers at toll plazas and red-light intersections. A cover marketed as legal or DOT approved gives no protection if it reduces readability. What counts is what the plate looks like to the officer or camera.
Angle and height on a truck
Trucks sit higher than cars, which affects mounting. Federal Motor Vehicle Safety Standard No. 108 requires a rear plate holder to provide a flat, stable surface. If the top edge of the plate is 47.25 inches or less above the ground, the surface must be within 30 degrees upward and 15 degrees downward of perpendicular to the road. Above 47.25 inches, the tolerance is 15 degrees either way. A plate tilted back on a lifted truck, or aimed at the ground on a low bumper, is harder to read. California also has a specific exception allowing truck-tractor rear plates up to 90 inches off the ground, per the same Vehicle Code 5201.

The practical rule for public roads: keep the plate uncovered, upright, clean and lit. For a state-by-state rundown, see our guide to U.S. license plate cover laws. If you have already been stopped, our page on what to do after a plate cover ticket walks through the steps.
Where a blackout cover fits a truck owner’s life
If you drive a truck, you probably spend time where a plate does nothing for anyone: a ranch road, an off-road park, a motorsport paddock, a trailer lot, a show field or a locked garage. In those places a plate cover is about protection and looks.
Use cases our customers are looking for:
- Off-road and trail use: The plate gets sandblasted by dust and caked in mud. A sealed cover keeps it clean until you need it.
- Motorsport and track days: On private tracks and closed courses, covering the plate keeps the truck looking clean for photos and event days.
- Shows and storage: A covered plate gives a clean rear end on display.
- Quick changes: Tool-free installation means you can move a cover between vehicles or take it off before you head out on public roads.
For the difference between the types, our overview of license plate privacy options compares five of them. If you are weighing improvised solutions, why DIY plate covers trigger stops explains where home-made covers go wrong. Our guide to mechanical and electric covers and installation goes deeper on setup. If you also drive an SUV, we have a page on SUV rear plate privacy, and for bikes there is one on motorcycle plate privacy.
Mechanical or electric: choosing for your truck
We offer both technologies, and that matters on a truck because mounting spots vary so much.
Mechanical (manual sliding curtain). You slide the curtain over the plate or open it by hand. There is nothing to wire, which suits rigs that already have crowded bumpers, winches and lighting. It is the simplest option to mount and maintain.
Electric (electric glass). You flip a switch or use the wireless remote, and the glass goes opaque instantly. The remote works from the cab. That suits owners who want to operate it without leaving the seat, for example at a staging area.
Both are made to fit standard U.S. and Canadian plates and both are built weather-sealed. The Ghost Curtain Cover is $129.99, one-off. Pick by how you use the truck: fewer connections for a work rig, remote convenience for a show truck.
Promo: the Ghost Curtain Cover for your truck
If your truck sees trails, tracks or show fields, the Ghost Curtain Cover gives you a weather-sealed cover that fits standard U.S. and Canadian plates and installs without tools. It is $129.99 one-off. We offer same-day shipping, and more than 10,000 drivers have bought from us, with a 4.9-star rating from nearly 3,000 reviews.

Use it where covering the plate is allowed, and uncover the plate before you drive on public roads.
Our view as a plate-cover specialist
Trucks are the hardest vehicles to fit with a plate accessory. Bumpers, tow hooks, sensors and cameras change from one trim to the next, so a product that only works on one mounting style leaves a lot of owners out. That is why we offer a mechanical cover and an electric one, both built around the standard 12" x 6" plate.
We think a cover should be easy to live with: no tools to install, weather-sealed for mud, rain and dust, and ready to use the day it arrives. That is how we designed ours, and it is why same-day shipping matters to us.
Our advice is simple. Choose the technology that suits your truck and the way you use it, mount it square and secure, and treat your state’s plate rules as the first thing to check before you drive on a public road. Used on private land, at events and in the paddock, a blackout cover keeps your plate protected and your truck looking the way you want.
GoGhost
FAQ
Do plate covers fit all trucks?
A cover made for standard plates fits the plate on any truck, because U.S. truck plates are 12" x 6". Whether it mounts cleanly depends on the bumper, tow hook, sensors and camera around the plate, so measure the space first. Our covers are made to fit all standard U.S. and Canadian plates.
Can I drive on public roads with a plate cover?
It depends on your state and the cover. Many states, including California, New York, Maryland and Massachusetts, restrict covers that reduce legibility or interfere with cameras. Keep the plate fully visible and legible on public roads, and check your state’s statute or DMV page.
Does a clear cover count as legal?
Not automatically. Glare can defeat automated cameras, and a “legal” or “DOT approved” label does not protect you if the cover reduces readability. Several states restrict glass or plastic covers that cut legibility or reflectivity.
How hard is it to install a cover on a truck?
It takes a few minutes. Clean the surface, square the plate, secure the cover so nothing swings, and check clearance against the tailgate, bumper and hitch. Our covers install without tools.
What does the Ghost Curtain Cover cost?
The Ghost Curtain Cover is $129.99 as a one-off price. You can find it on our product page.
Sources
- U.S. License Plate Sizes and Dimensions Guide
- Steelcraft Automotive FAQ
- License Plate Visibility and Legibility Requirements
- California Vehicle Code 5201
- New York DMV consumer alert
- Maryland House Bill 470, Chapter 566
- 540 CMR 22.00, Massachusetts
- Arkansas Code 27-14-716
- California AB 1085
- State v. Mendell (Oregon Court of Appeals, 2024)